 |
 |
|
|
|
| Silres 603 |
 |
| High temperature resistant coatings must consist of at least 30% SILRES 603 in combination with heat resistant pigments, extenders, fillers and organic binders. Pigments, fillers and extenders which are normally used in heat resistant coatings are ironoxide black, spinel black, aluminum oxide, titanium (rutile) dioxide, micaceous ironoxide, talc and barium sulfate. The type of organic binder should be carefully selected to maximize heat resistance of the coating. Typical organic binders used are acrylic, epoxy cresol novolac, polyesterhybrid and polyester - TGIC. The addition of fumed silica, and aluminumoxide will increase the free flow properties of powder coatings. The former will also act as a charge control additive to increase the transfer efficiency of electrostatic spray. |
 |
Appearance : Clear to light straw flakes
Softening Point, 'C, ('F) : 55 - 80 (149 - 185)
Silicone Content, % : >98
Hydroxyl Content, % : 3 - 5
SiO2 Equivalent wt., % : 45
Density, g/ml, (lb/gal) : 1.22 (10.16)
Bulk Density, kg/m3 : 650 |
|
|
|
 |
|
|
|
|
|
 |
| There are no existing companies to distribute selected chemical product |
|
 |
|
|
|
