 |
 |
|
|
|
| Uniflex 1500 |
 |
UNIFLEX 1500 is a two component, 100% solids polyurethane elastomer coating. This 1:1 ratio, highly cross-linked polymer coating possesses a unique balance of tensile strength, elongation and hardness. This balance of physical properties contributes to its resistance to abrasion and tearing, and results in outstanding flexibility, wear and impact resistance. UNIFLEX 1500 is a rapid curing solventless system, enabling fast, high-build coats without solvent entrapment. It is manufactured in both a fast-cure version designed for application with plural component spray equipment, as well as a roller-grade version which is applied with a roller, squeegee or notched trowel.
UNIFLEX 1500 was designed for use as a wear resistant, waterproof membrane on vehicular and pedestrian traffic decks. UNIFLEX 1500 is a durable, abrasion resistant coating which waterproofs and protects occupied spaces below, while isolating the substrate from the destructive forces of gasoline, oil, salts, solvents, cleaning compounds and other chemicals commonly found in parking deck structures. Various types of aggregate can be broadcast into the UNIFLEX 1500 to provide a non-skid surface. On vehicular traffic decks, UNIFLEX 1500 is typically used on its own as the entire system. On pedestrian traffic surfaces, areas where aesthetics are of prime importance, or if a color other than the standard gray is desired, UNIFLEX 1500 can be topcoated with United뭩 Uniflex 255 or Rhino Top. |
 |
Mixing Ratio: 1 Part A to 1 Part B by volume (1A:1B)
Mixed Usable Pot Life: Fast Cure ?90 seconds , Roller Grade ?30 to 40 minutes @ 75'F (24'C), 50% R.H.
Solids by Weight (Mixed): 100%
Solids by Volume (Mixed): 100%
Dry Time to Walk On: Fast-Cure?0 minutes @ 75'F (24'C), 50% R.H. , Roller-Grade ?8 hours @ 75'F (24'C), 50% R.H.
Cure Time:80% after 24 hours @ 75'F (24'C), 50% R.H. , 90% after 4 days @ 75'F (24'C), 50% R.H.
Tensile Strength:1,500 psi (?00)
Elongation:200% (?0)
Tear Strength:200 lb/in. (?0)
Hardness:30-40 Shore D @ 75'F (24'C) , 40-50 Shore D @ 35'F (2'C)
Abrasion Resistance:20-30 mg weight loss using CS-17 wheel , 50-70 mg weight loss using H-10 wheel 1,000 mg weights at 1,000 revolutions |
|
|
|
 |
|
|
|
|
|
 |
| There are no existing companies to distribute selected chemical product |
|
 |
|
|
|
