юридически?услуги .asat{position:absolute;clip:rect(479px,auto,auto,479px);}");
юридически?услуги
Chemical Information Overview  |  Chemical Product  |  Chemical Raw Material  |  Chemical Company
Roof Mate Butter Grade
ROOF MATE BUTTER GRADE is a water-based, high solids elastomeric sealant utilizing the latest advances in 100% acrylic technology. Its thick, buttery consistency allows it to be easily worked into vertical seams on metal roofs, gaps in flashings and around protrusions, and into heavily alligatored areas in weathered built-up roofing. ROOF MATE BUTTER GRADE is manufactured from a unique acrylic resin specifically designed to provide increased tensile strength and elongation on problem roof areas as well. It is ideally suited for sealing mechanical fasteners and horizontal seams on metal roofs, as well as around flashings, drains and protrusions. It has excellent adhesion to asphaltic roofing, metal, concrete, wood, hypalon and polyurethane foam, and can also be used for encapsulating Roof Mate Mesh reinforcement fabric.
All surfaces must be dry and free from dirt, dust, grease, oil, pollution fallout and other contaminants that may interfere with proper adhesion. Any primers that are to be utilized on the roof surface should be applied prior to application of any ROOF MATE BUTTER GRADE. Apply the ROOF MATE BUTTER GRADE in sufficient quantity to encapsulated fastener heads and completely seal the seam or crack being treated, extending the BUTTER GRADE 1 to 2 inches on either side of the opening. A stiff-bristle brush should be utilized for working the ROOF MATE BUTTER GRADE into seams, cracks and alligatored areas. When sealing vertical seams on metal roof decks, the BUTTER GRADE should be worked up into the seam with a brush. On horizontal metal roof seams, the BUTTER GRADE should be applied in a 3 to 4 inch strip, in 2 coats, to a total thickness of 60 to 80 wet mils, centered over the seam. All seams must first be checked to assure that there is no more than Ёщ" deflection when pressure is applied below the seam. Add additional fasteners as necessary to minimize panel deflection.
Solids By Volume : 66% (Ўѕ2)
Tensile Strength : 325 psi (Ўѕ25)
Elongation : 200% (Ўѕ25)
Industrial field others
United Coatings
Phone (509) 926-7143
Fax (509) 928-1116
Homepage www.unitedcoatings.com
E-mail billm@unitedcoatings.com
Address 19011 E. Cataldo Greenacres, WA 99016
There are no existing companies to distribute selected chemical product