 |
 |
|
|
|
| Roof Mate |
 |
ROOF MATE is a water-based, high solids elastomeric coating utilizing the latest advances in acrylic technology. Highest quality 100% acrylic resins are combined with reinforcing laminar pigments, an effective biocide package and non-migrating fire retardants, resulting in superior durability, weatherproofing, ultraviolet resistance, algae/mildew resistance and fire resistance. ROOF MATE is a highly reflective, permanently flexible ¡°breathing¡± membrane, allowing moisture vapor from the substrate or building interior to escape while remaining impervious to mass water penetration from the exterior. ROOF MATE is also available in a high tensile strength version for roof areas subject to severe maintenance traffic, weather conditions, chemical fallout, etc.
ROOF MATE was especially developed for extending the life of metal, conventional built-up, modified bitumen, concrete, Hypalon, EPDM, sprayed-in-place or board-stock insulation, or composite shingle roofs. ROOF MATE forms a waterproof elastomeric seal, uniformly covering the textured profile of various substrates to form a monolithic membrane, providing protection from normal weathering, aging, and ultraviolet exposure. |
 |
Solids by Weight: 60% (¡¾2)
Solids by Volume: 54% (¡¾2)
Weight per Gallon: 11.8 lbs. (¡¾.2) (1.41 kg/l)
Dry Time for Water Resistance: 2¨ö hours @ 70¡ÆF (21¡ÆC), 50% R.H. White @ 16 wet mils (406 icrons)
Tensile Strength: 250 psi (¡¾20) (1.80 MPa) @ 75'F (24'C) , 440 psi (¡¾20) (3.17 MPa) @ 0'F (-18'C)
Elongation: 300% (¡¾30) @ 75'F (24'C) , 340% (¡¾30) @ 0'F (-18'C)
Hardness:55 - 65 Shore A
Permeance: 3.0 U.S. Perms (1.98 Metric Perm) @ 20 mils (508 microns)
Ultraviolet Resistance: No deleterious effects after 5,000 hours
Weather Resistance: No deleterious effects after 5,000 hours
High Temperature Stability:No age hardening up to 250'F (121'C)
Resistance to Wind Driven Rain: 0.3% moisture result
Bond Strength:Exceeds cohesive strength of coating
Temperature Limits for Service Conditions (Surface):-30'F to 180'F (-35'C to 82'C)
Code Approvals:UL 790 Class A, Factory Mutual Class I and ICBO. |
|
|
|
 |
|
|
|
|
|
 |
| There are no existing companies to distribute selected chemical product |
|
 |
|
|
|
