 |
 |
|
|
|
| Epoqua II |
 |
EPOQUA II is a two-component, water-borne epoxy coating available in either gloss or satin sheens. The epoxy resin is cured with an acrylic curative to form a smooth, tough, tile-like coating which exhibits outstanding chemical, stain and abrasion resistance properties. EPOQUA IIoffers the durability and stain resistance which in the past has only been available with two component solvent-basedepoxy products. EPOQUA IIalso has excellent resistance to high moisture and humidity. This unique water reducible, low odor epoxy coating contains no mercurial compounds yet effectively resists mildew and many strains of fungus growth. EPOQUA II is formulated to meet all existing Federal and State air pollution control standards and VOC regulations.
EPOQUA II was especially developed for use on wall surfaces which are subjected to repeated scrubbing, or where long term stain resistance is of prime importance. EPOQUA II has excellent resistance to many chemicals, oil and other substances. Refer to paragraph entitled Stain Resistance for a list of those materials which have been tested. EPOQUA IIcan be applied to drywall, plaster, concrete, concrete block, brick, wood, metal and to surfaces which have been previously coated. The bond strength of EPOQUA IIto these substrates is excellent. This durable coating is recommended for use in schools, hospitals, athletic facilities, commercial kitchens, public restrooms, and in wet areas such as showers, locker rooms, dairies, food processing plants and other high humidity areas. It is also an excellent industrial maintenance coating for use on equipment, railings, machinery, etc. EPOQUA IIis authorized by the USDA for use in Federally inspected meat and poultry processing plants, or in areas subject to incidental food contact. EPOQUA II Clear can be used as a topcoat or can also be reduced 100% with water for use over concrete floors as a sealer or primer under numerous topcoats. |
 |
Mixing Ratio:Approx. 16 Parts A to 1 Part B (16A:1B)
Mixed Usable Pot Life:36 hours for spray, brush or roller application at 75'F (24'C), 50% R.H.
Solids by Weight (Mixed): 45% (¡¾2) White , 32% (¡¾2) Clear
Solids by Volume (Mixed): 35% (¡¾2) White , 29% (¡¾2) Clear
Flash Point: Part A: >200'F (93'C) , Part B: >200'F (93'C)
Flame Spread Rating: NFPA Class "A" and UBC Class I over non-combustible substrates [ASTM E 84]
Gloss:80 + (60' Gardner)
Hardness:F Pencil
Permeance: 5.3 Perms at 6 mils
Abrasion Resistance: 80 - 90 mg weight loss using CS-17 abrasive wheels with 1,000 gm weights at 1,000 revolutions
Dry Time: Tack free = 2 to 4 hours @ 75'F (24'C), 50% R.H. [ASTMD 1640]
Cure Time: 7 days to develop ultimate film properties @ 75'F (24'C), 50% R.H.
Temperature Limits for Normal Service Conditions:-30'F to 150'F (-34'C to 66'C) |
|
|
|
 |
|
|
|
|
|
 |
| There are no existing companies to distribute selected chemical product |
|
 |
|
|
|
