 |
 |
|
|
|
| Elastuff 101/102 |
 |
ELASTUFF 101/102 is a high solids, moisturecatalyzed, single-component polyurethane coating system. The system consists of ELASTUFF101, an aromatic polyurethane basecoat, and ELASTUFF 102,a UV-resistant, 100% aliphatic polyurethane topcoat. This combination provides an excellent balance of tensile strength, elongation and hardness, resulting in long term flexibility and impact resistance. High abrasion resistance also offers protection from maintenance traffic and severe weather conditions. Non-migrating fire-retardant chemicals are permanently locked into the coating, ensuring long term fire retardancy. The ELASTUFF 101/102 system is a permanently
flexible ¡°breathing¡± membrane, allowing moisture vapor from within the substrate or
building interior to escape though the coating, while remaining impervious to mass water penetration from the exterior. ELASTUFF 101 and 102 are single-component elastomers which are catalyzed through exposure to moisture in the air. They are designed for application through standard airless spray equipment, as well as brush or roller.
The ELASTUFF 101/102 system is designed for protecting a wide range of substrates from the effects of weathering and moisture intrusion. It is particularly effective as a protective membrane over polyurethane foam on new or existing roofs, and hot or ambient storage tanks. It provides a barrier to the effects of degradation caused by normal weathering, aging and ultraviolet exposure. The ELASTUFF 101/102 system also achieves excellent adhesion to primed concrete, masonry, metal and wood surfaces. ELASTUFF 102 is very effective when used on its own in a wide variety of applications requiring a tough, abrasion resistant membrane. |
 |
Solids By Weight - Basecoat: 82% (¡¾2) , Topcoat: 75% (¡¾2)
Solids By Volume - Basecoat: 80% (¡¾2) , Topcoat: 65% (¡¾2)
Flash Point - Basecoat: 75'F (24'C) , Topcoat: 75'F (24'C) [Seta-Flash closed cup]
Dry Time To Walk On - Basecoat: 6-8 hours @ 24 wet mils , Topcoat: 8-12 hours @ 16 wet milswith booster
Tensile Strength - Basecoat: 1,000 psi (¡¾100) , Topcoat: 2,500 psi (¡¾200)
Elongation - Basecoat: 500% (¡¾50) , Topcoat: 400% (¡¾50)
Tear Strength - Basecoat: 125 lbs. per inch (¡¾20) , Topcoat: 285 lbs. per inch (¡¾25)
Hardness - Basecoat: 65-70 Shore A ,Topcoat: 90-95 Shore A
Abrasion Resistance - Less than 35 milligrams weight loss using CS-17 abrasive wheels and 1000 gram weights after 1000 cycles on Taber Abraser.
Low Temperature Flexibility - Passes 180 degree flex over1/8" mandrel at -7'F (-22'C), Federal Test Method No. 141a-6221.
Low Temperature Impact Resistance - No surface cracks or breaks when impacted with 130 gram, 1¨ù" steel ball dropped from a height of 5' at -12'F (-25'C).
Temperature Limits For Normal Service Conditions - Tested from -30'F to 200'F (-34'C to 93'C).
Fire Resistance - UL-790 Class "A" listed system over spray applied polyurethane foam. Consult UL Building Material Directory for specifics. |
|
|
|
 |
|
|
|
|
|
 |
| There are no existing companies to distribute selected chemical product |
|
 |
|
|
|
