 |
 |
|
|
|
| Aquathon |
 |
Exterior elastomeric wall waterproofing. AQUATHONis a fluid-applied, 100% acrylic waterproof elastomer possessing outstanding adhesion to various substrates. AQUATHON is a permanently flexible ¡°breathing¡± membrane, allowing moisture vapor from the substrate or building interior to escape through the coating while remaining impervious to mass water penetration from the exterior. AQUATHONcures in a two-stage mode. The exposed surface crosslinks under ultraviolet light, while the sub-surface of the coating is protected from further crosslinking and retains a permanent elastomeric bond to the substrate. This eliminates the need for a separate topcoat and allows the system to repel dirt, mildew and pollution without sacrificing flexibility. It contains no plasticizers, and will not harden or slump with age or changes in temperature.
AQUATHON was specifically developed to waterproof concrete and masonry building exteriors. It has the ability to uniformly cover the profile of textured substrates, forming a continuous membrane resistant to all forms of weather and airborne pollutants. AQUATHON effectively covers existing hairline cracks and repaired areas, and bridges hairline cracking caused by further building movement. It will provide long term, aesthetically pleasing waterproofing on all types of concrete and masonry surfaces. It is available in smooth or a wide range of textured finishes. AQUATHONis also authorized by the USDA for use on surfaces where there is a possibility of incidental food contact. |
 |
Solids by Weight: 61% (¡¾2)
Solids by Volume : 50%* (¡¾2)
Tensile Strength : 150 psi (¡¾25) @ 75'F , 400 psi (¡¾25) @ 0'F
Elongation : 300 (¡¾50) @ 75'F , 400 (¡¾50) @ 0'F
Hardness : 60 - 70 Shore A
Permeance : 7.7 perms at 15 mils
Dry Time @ 75'F, 50% R.H. : 1¨ö hrs @ 20 wet mils
Low & High Service Temperature Limits : -30'F to 200'F (-34'C to 93'C) |
|
|
|
 |
|
|
|
|
|
 |
| There are no existing companies to distribute selected chemical product |
|
 |
|
|
|
