 |
 |
|
|
|
| Alumiseal |
 |
Rust inhibitive metal primer
ALUMISEAL is a single component, low viscosity polyurethane primer containing aluminum pigment. This provides excellent resistance to ultraviolet exposure and exterior weathering. ALUMISEAL cures by reacting with moisture in the air to form a high molecular weight polymer, resulting in a tough, chemical and abrasion resistant finish. ALUMISEAL is manufactured with a low viscosity resin designed to maximize "wetting" of the surface. This allows for rapid, thorough
penetration of porous substrates and enhances adhesion to clean or sound rusted metal surfaces. ALUMISEAL exhibits superior resistance to rust and corrosion caused by chemicals, solvents, salt water and humidity.
ALUMISEAL is designed to provide maximum corrosion protection, rust inhibition and adhesion over steel, aluminum and galvanized metal surfaces. It is an excellent choice for use over sound rust on metal surfaces when sandblasting is not possible or practical. ALUMISEAL exhibits the unique ability to "wet" into weathered substrates, developing superior adhesion while resisting corrosive conditions, even when sound surface rust is present. Loose flaking or unsound rusted metal must be brought into sound condition or replaced. ALUMISEAL is an excellent primer for use under acrylic or solvent-based roof coatings and industrial finishes. United¡¯s Roof Mate, Diathon, Acryclad, Epoqua II and Elastuff 120 & 504 all develop outstanding adhesion to ALUMISEAL. Refer to United¡¯s chart entitled Primer Recommendations for ease in making a determination as to which primer to use under a specific set of conditions. |
 |
Solids by Weight: 60% (¡¾2)
Solids by Volume: 55% (¡¾2)
Weight per Gallon: 9 lbs (¡¾.3)
Flash Point: 80'F (26'C)
Volatile Organic Content (VOC) : Less than 420 grams/liter[calculated]
Dry Time to Touch: 1 hour @ 75'F (24'C), 50% R.H.
Cure Time: 12 hours @ 75'F (24'C), 50% R.H.
Flexibility: Passes 1/8" mandrel flex @ 0'F (-18'C)
Temperature Limits for Service Conditions: -30'F to 200'F (-34'C to 93'C) |
|
|
|
 |
|
|
|
|
|
 |
| There are no existing companies to distribute selected chemical product |
|
 |
|
|
|
