 |
 |
|
|
|
| Adhere-it |
 |
Rinseable primer for epdm surfaces
ADHERE-IT is a breakthrough product specifically developed for dramatically increasing the bond of UNITED'S Roof Mate Topcoat to new or weathered EPDM surfaces. ADHERE-IT is a low viscosity, pinkish liquid that chemically alters the EPDM surface to which it is applied, creating a "lock and key" effect with the subsequent Roof Mate Topcoat. It is not recommended for use with other acrylic coatings, since without the "lock and key" effect there will be little or no improvement in the adhesion.
Remove heavy deposits of dirt, leaves, pine needles and other debris using a broom or air blower. Any rocks, branches or other large foreign objects should also be removed. ADHERE-IT can be applied directly over EPDM surfaces containing residual amounts of dirt, dust and other contamination.
ADHERE-IT is a ready-to-use material. It can be applied using a Hudson-type agricultural sprayer, as well as through conventional or airless spray equipment. Safety glasses with side shields and latex gloves are recommended when transferring ADHERE-IT from the shipping container to the sprayer. If using a Hudson sprayer, adjust spray nozzle to achieve a uniform spray pattern with a 3 to 4 foot arc. If using airless spray equipment, use a .015" to .019" reversible tip with a 40 to 50' fan angle. Application rate is 500 sq. ft. per gallon over new or existing EPDM surfaces.
Allow ADHERE-IT to stand a minimum of 5 minutes to wet out and react with the EPDM surface. Rinse with clean water using a minimum 2,000 psi pressure washer. Begin the power rinse at the lowest point on the roof and work upwards, keeping the pressure washer tip within 12" of the EPDM surface. Once the highest point on the roof is reached, work down again with a final rinse to remove any excess mica from the roof. After cleaning, the roof should be "jet black" in color, which is an indication that the surface has been chemically altered. Allow surfaces to dry thoroughly prior to application of the Roof Mate Topcoat. Clean equipment with water and biodegradable detergent, such as United Cleaning Concentrate (UCC), or equal. Purge the water from the pump and hoses using Mineral Spirits prior to storing for any length of time. |
 |
No Treatment : 0.5 pli
ADHERE-IT : 2.0 pli |
|
|
|
 |
|
|
|
|
|
 |
| There are no existing companies to distribute selected chemical product |
|
 |
|
|
|
