 |
 |
|
|
|
| RU-92 |
 |
Polyurea Spray Elastomer System
Fast-curing, spray-applied tough coating.
GacoFlex RU-92 polyurea spray elastomers are two-component, fast curing, 100% solids coatings. Both components are low viscosity fluids, which react very quickly to form a tough polymer. These components are mixed and applied using heated plural component airless spray equipment. The cured material is characterized by high physical properties, outstanding chemical and solvent resistance and usability under wide climatic conditions with outstanding durability. Some applicable uses would include, but not be limited to, the following:
- Lining steel, masonry or wood tanks, silos, pipes and flumes.
- Application to geotextiles to form ponds, contain spills, prevent escape of effluents and prevent loss of water or petroleum products.
- Provides tough, abrasion, chemical and corrosion-resistant liner for truck beds and under carriages.
- May be used to repair or replace existing containment liners. |
 |
Strength : 2400 psi minimum (17.24 MPa)
Elongation : 200% minimum
Permanent Set at Break : 30% max.
Hardness : 45-55 Shore D
Service Temp : -40' to 300'F (-40' to 148'C) |
|
|
|
 |
|
|
|
|
|
 |
| There are no existing companies to distribute selected chemical product |
|
 |
|
|
|
