 |
 |
|
|
|
| Mold cleaner 2508 |
 |
Mold Cleaner 2508 is a unique blend of active solvents formulated to remove build-up associated with molding thermoset resins such as polyurethanes, epoxies, polyester and vinyl esters. This cleaner will clean mold release and resin residue from steel and aluminum surfaces. Mold Cleaner 2508 does not contain chlorinated or fluorocarbon solvents.
Field tests have shown that 2508 exhibits excellent results when compared to methylene chloride or other blends of chlorinated solvents. Mold Cleaner 2508 uses ingredients which are both low in toxicity and environmental hazards and with low odor. For large vertical surfaces, use Mold Cleaner 2734 Gel, a specially formulated mold cleaner designed to cling to all surfaces.
* Application:
1. Thoroughly clean your mold with Mold Cleaner 2508 or any suitable cleaner to remove all traces of previous coating and oils.
2. Apply Mold Cleaner 2508 using aerosol spray for bulk grades. Hold the can or spray gun 6 to 8 inches from the mold surface to ensure a light even coating. When the molds are new or have
been blasted with an abrasive, "season" the mold by applying a heavy coating of release. Heat the mold to process temperature, then wipe the excess with a rag and reapply a light coating of
Mold Cleaner 2508 before regular molding.
3. Mold Cleaner 2508 is fast drying and requires no baking during the normal molding process.
4. Reapply a light coating before each molding. |
 |
Odor: Solvent
Appearance: Clear Liquid
Color: Clear
% Non-Volatile: None
Flash point: >100F
Viscosity: Water-like
Mold Types: Aluminum & steel |
|
|
|
 |
|
|
|
|
|
 |
| There are no existing companies to distribute selected chemical product |
|
 |
|
|
|
