 |
 |
|
|
|
| Dag 802 |
 |
The Dag 802 Central Lubricant Supply System was designed to simultaneously supply a large number of die casting machines or forging presses.
The unit is ideal for those situations where a central supply system is needed to provide one lubricant throughout the plant.
The unit is very similar to the Dag 801, but is a larger capacity system.
For instance, it features a 45-gallon RFU tank.
The proportioning system incorporates the same low maintenance diaphragm pumping units but will provide up to 80-gallons per hour at over 2:1 dilution ratios.
Its diaphragm output system will provide 24 gpm of ready for use lubricant for your plant needs. |
 |
Recommended installation: closed loop
Air Supply: 25 cfm, 1/2" NPT @ 90 psi)
Electric: 110 volt, single phase
Air: 90 psi @ 25 cfm
Water: 1:1 to 1:100 (product:water), 80 gph at 1:2
Delivery Rate: 24 gpm |
|
|
|
 |
|
|
|
|
|
 |
| There are no existing companies to distribute selected chemical product |
|
 |
|
|
|
