 |
 |
|
|
|
| Crystal 2000 |
 |
| Polymeric Resin |
 |
Rubber Surface Anti-Stick Agent Preforms / Finished Goods.
Slab Dip - Using 2000 will prevent uncured stock from sticking to itself or to other uncured stocks. 2000 is transparent and will not discolor white or colored stocks.
Lubricating Extruded Goods - Passing an extrusion through a 2000 solution will prevent sticking during cure. A 1 part 2000 to 3 part water solution is recommended.
Preventing of Water Spotting in Open Stream Cure -To prevent water spotting in open steam cure, pass stock through a 1 part 2000 to 1 part water solution before cure.
This coating will prevent water droplets from standing on the surface of finished parts, thereby eliminating spotting.
Preforms for Molding Operations - Using a solution of 1 part 2000 to 3 parts water will prevent uncured preforms from sticking to each other or any uncured stocks.
Mold Lubricant - To allow easier removal of goods from molds, coat slab stocks or preformed stocks with 2000 or the recommended dilution.
Unlike soaps or different stearates, coating with 2000 also prevents build-up on the molds.
Finished Goods- Coating finished goods with a I part 2000 to 3 part water solution will prevent sticking.
This solution is transparent unlike powders or other release agents. |
 |
Odor: Mild, pleasant
Appearance: White milky liquid
Boiling Point: 100'C (212'F) (water)
Evaporation Rate: Approximately 1 (water = 1)
Specific Gravity: Approximately 1
Vapor Density: Approximately 1
Vapor Pressure: Approximately 1
Percent Volatile: Approximately 92 |
|
|
|
 |
|
|
|
|
|
 |
| There are no existing companies to distribute selected chemical product |
|
 |
|
|
|
