 |
 |
|
|
|
| Molykote 7409 Anti-Friction Coating |
 |
Heat cure coating for high loads with good corrosion protection and very good chemicals resistance.
MOLYKOTE 7409 Bonded Lubricant is a dispersion of solid lubricants in an organic resin-solvent system.
When applied to metal surfaces it forms an extremely adherent, dry film with excellent corrosion-preventing properties and an operating temperature range of -70 to 380'C (-94 to 716'F).
The solid lubricants provide a low coefficient of friction and high load-carrying capacity under conditions where conventional lubricants are ineffective or undesirable.
MOLYKOTE 7409 Bonded Lubricant is one of a range of bonded lubricants available from Dow Corning, each of which has been designed to meet particular handling, processing and operating conditions.
*Special Features of MOLYKOTE 7409 Bonded Lubricant include:
- High load-carrying capacity
- Long wear life
- Excellent corrosion-preventing properties
- Outstanding resistance to hydraulic fluids, oils and solvents
- Dry, nontacky film that does not attract dust
- Good adhesion, even when surface is not pretreated
- Use in very thin films (down to 3 microns)
*MOLYKOTE 7409 Bonded Lubricant is recommended to meet the following conditions:
- Very high loads, low speeds
- Extreme temperatures
- When fretting is likely
- Corrosion of substrate must be prevented
- Dust is a problem
- Oil and grease are not acceptable
- Relubrication is not possible
- Very low friction is needed |
 |
Solid Lubricant Used: MoS2
Solvent: Organic / 7414
Curing time (min@'C): 60 @ 220
Service Temperature ('C): -70 to +380
Load carrying capacity(Falex): 13500N
Type: Dispersion of solid lubricants in an organic resin-solvent system
Physical Form: Pourable liquid
Color: Dark gray
Method of Application: Spray, dip or brush
Cure: Heat cured |
|
|
|
 |
|
|
|
|
|
 |
| There are no existing companies to distribute selected chemical product |
|
 |
|
|
|
