 |
 |
|
|
|
| Nulok 390 |
 |
Nucap, Nulok and Polyfil WC are high quality, very clean, water-washed kaolin clays surface - modified with a coupling agent.
The coupling agent modification produces a filler which chemically bonds to the elastomer enhancing many physical and processing properties.
Typical coupling agents utilized are of the mercapto, polysulfide, amino and vinyl types.
Calcined (heat treated) chemically modified grades are also available.
All of these chemically treated clays are hard clays with very controlled physical properties such as: pH, particle size, brightness and 325 mesh sieve residue.
This closely monitored process provides more consistency and allows for smoother extrudates, less sticking to hot metal surfaces, higher tensile and tear resistance and other benefits.
Also, this process virtually eliminates all crystalline silica producing environmentally superior clays compared to air-floated varieties with less health hazards related to airborne dust.
All grades have a specific gravity of 2.60, 1.0% moisture content and 0.005% 325 mesh sieve residue.
Clays are used as low cost non-black reinforcing, stiffening or extending fillers in natural and synthetic rubbers.
Typical loadings are from 20 phr to 200 phr.
Chemically modified clays are utilized to increase physical properties including modulus, compression set, abrasion and tear resistance while reducing die swell and heat buildup (hysteresis).
Different chemical treatments of coupling agents are available.
Mercapto and polysulfide modified clays are recommended for sulfur cure compounds.
Vinyl andamino modified fillers are recommended for peroxides cure systems.
Calcined and chemically treated grades, Polyfil WC and Nulok 170, are especially useful in high voltage electrical applications for wire and cable, specialty polymer systems and thermoplastic applications.
Treated clays are used as essential cost reduction fillers partly or totally replacing silica, carbon black or titanium dioxide in numerous rubber articles and tires. |
 |
Brightness (% reflectance): 91
pH (28 % solids): 8.7
Med. Particle Size (m): 0.2
Surface Area (m2/g): 22 |
|
|
|
 |
|
|
|
|
|
 |
| There are no existing companies to distribute selected chemical product |
|
 |
|
|
|
