 |
 |
|
|
|
| Uniplex 260 |
 |
| Glyceryl tribenzoate |
 |
| 614-33-5 |
 |
UNIPLEX 260 is a solid polyol benzoate modifier for a wide range of polymers.
UNIPLEX 260 is considered as a very safe plasticizer with an LD50 (Rats) of greater than 11.7 g/kg body weight.
UNIPLEX 260 is approved by the FDA according to Code of Federal Regulations 21:
- 174.5 (Indirect food additives: General)
- 175.105 (Vinyl acetate/crotonicacid copolymer)
- 175.365 (Vinyidene chloride copolymer coatings for polycarbonate film)
- 175.380 (Xylene-formaldehyde resins condensed with 4, 4' isopropylidenediphenol-epechloro-hydrin epoxy resins)
- 175.390 (Zinc-silicon dioxide matrix coatings)
- 176.170 (Components of paper and paperboard in contact with aqueous and fatty foods)
- 176.180 (Components of paper and paperboard in contact with dry food)
- 176.1210 (Closures with sealing gaskets for food containers)
UNIPLEX 260 is especially recommended for use in heat seal applications. It is blended into polyvinyl acetate-based adhesives at a temperature below the melting point. Typically, a high shear mixer is used to reduce the particle size of the UNIPLEX 260 formulation until a smooth stable dispersion is obtained. The UNIPLEX 260 may be incorporated at levels of 20 to 40 parts based on 100 parts polymer. The dispersed coating is then applied to the paper stock and dried below 71'C. It is important that the UNIPLEX 260 not be melted (activated) until the coated stock (label) is to be applied to the package or other item. Melting of the UNIPLEX 260 results in a tackifying and plasticizing of the coating, which is essentially irreversible.
UNIPLEX 260 may be used in cellophane coatings to improve heat-seal properties, without affecting color and clarity of the film.
UNIPLEX 260 an outstanding plasticizer for nitrocellulose coatings where it promotes heat-sealability and adhesion, creates a moisture barrier and resists oil/water extraction. These properties are of great value in heat seal coatings, lacquers and films.
UNIPLEX 260 is an excellent non-formaldehyde resin substitute and plasticizer in nail lacquer
UNIPLEX 260 is an excellent non-formaldehyde resin substitute and plasticizer in nail lacquer formulations. It imparts superior durability and aesthetic properties. The incorporation of UNIPLEX 260 into printing ink formulations and adhesives greatly improves adhesion and water resistance when applied to a variety of substrates. |
 |
Vapor Pressure : 0. 01 mm Hg at 150'C
Vapor Density (Air = 1) : ND
Specific Gravity : 1.26
Evaporation Rate : ND
Solubility in Water : Insoluble
Freezing Point : Approx. 70' C
pH : NA
Odor : Mild
Boiling Point : 150' C at 0.01 mmHg
Appearance : Off white solid
Viscosity : ND
Physical State : Solid |
| Industrial field |
additive, plastic, polymer, resin, monomer |
|
|
 |
|
|
|
|
|
 |
| There are no existing companies to distribute selected chemical product |
|
 |
|
|
|
