Chemical Information Overview  |  Chemical Product  |  Chemical Raw Material  |  Chemical Company
Perkacit DPG
N.N-Di-phenylguanidine
102~6-7
Perkacit DPG is used as a secondary accelerator in combination with thiazoles and sulfenamides in most of the sulfur cured elastomers.
In NR and SBR latices it is used as a gelling agent in foam processes.
- Perkacit DPG as a secondary accelerator shows a synergistic effect when used with thiazoles and sulfenamides giving faster cure rates and higher levels of mechanical properties in all general purpose elastomers.
- Perkacit DPG is generally not used alone as it tends to be very slow and scorchy.
- Due to discoloration it is generally not suitable for light colored compounds.
- Perkacit DPG can be used in latex as a secondary gelling agent (foam stabilizer) in the silico-fluoride foam process.
- Using Perkacit DPG gives fast cures with good reversion and fatigue resistance and better storage stability than obtained with formulations activated by thiurams and dithiocarbamates.
- Perkacit DPG is regulated for use in articles in contact with food as specified under FDA 21 CFR 177.2600 and under BgVV XXI, Categories 3-4.
0.1-1.0 phr
Appearance : off white granules
Assay (titration)(%) min. : 96.5
Melting point, initial('C) min. : 144
Melting point, final('C) : 145-149
Heat loss (%) max. : 0.3
Ash(%) max. : 0.4
Additive (%) : 1.0-2.0
Residue on 150 micron sieve (%) max. : -
Residue on 63 micron sieve (%) max. : -
Density at 20'C (kg/m3) : 1180
Industrial field additive
Flexsys Co
Phone 905-826-9222
Fax 905 826-3119
Homepage -
E-mail
Address 2330 Argentia Rd., Missisauga, Ontario, L5M 2G4
There are no existing companies to distribute selected chemical product