 |
 |
|
|
|
| Methyl Tuads |
 |
| Tetramethylthiuram disulfide |
 |
| 137-26-8 |
 |
For NR and synthetic rubbers (especially IIR, CR).
Accelerator and vulcanizing agent.
Cure modifier for Neoprene (retards G types, accelerators W types).
Non-discoloring in light stocks. |
 |
2-4 phr (vulcanizer in NR). 0.3-1 phr (primaryaccelerator in NR, SBR. NBR). 0.05-0.3 phr (sec.acoeleator in NR), 3-5 phr (vulcanizer in SBR, NBR).1-2 phr (primary accelerator in IIR, EPDM)
|
 |
Composition: Tetramethylthiuram disulfide
Physical State: White to light cream powder
* Specification
- Ash Content 0.3% maximum
- Fineness, retained on 0.1% maximum
- 150 micron sieve
- Heat Loss 0.3% maximum
- Melting Point
- Initial 142'C minimum
- Final 150-157'C
* GENERAL INFORMATION : Typical values not routinely measured or reported on the Certificate on Analysis.
- Antidusting Agent Content 2%
- Density at 20¡ÆC 1.425 Mg/m3
- Solubility : Soluble in toluene and chloroform. Insoluble in water, hexane and gasoline. |
| Industrial field |
additive, rubber & additives |
|
|
 |
|
|
|
|
|
 |
| There are no existing companies to distribute selected chemical product |
|
 |
|
|
|
