 |
 |
|
|
|
| Silastic T2 Base&Silastic T2 Curing Agent |
 |
Translucent, high strength silicone mold making rubber suited for prototype design and production tooling.
Silastic T-2 is recommended for use with rigid polyurethane and can be used with polyesters, foam polyurethane, cement and plaster.
SILASTIC T2 is a two-component material consisting of SILASTIC T2 Base, which when mixed with SILASTIC T2 Curing Agent, cures at room temperature by an addition reaction.
A range of materials can be cast or injected into the cured silicone mold: polyurethane and other reactive resins are materials typically used. |
 |
Appearance when cured: translucent
Curing Time (hours): 24
Durometer Hardness, Shore A: 42
Elongation at break (%): 300
Linear Shrinkage (%): < 0.1
Mixed viscosity (mPa.s): 50,000
Mixed viscosity (Poise): 500
Mixing ratio: 100:10
Tear Strength (kN/m): 21
Tear Strength (ppi): 120
Working Time (minutes): 120 |
|
|
|
 |
|
|
|
|
|
 |
| There are no existing companies to distribute selected chemical product |
|
 |
|
|
|
